How do I boot into Safe Mode?
Interrupt boot process 3 times to trigger Automatic Repair. Go to Troubleshoot > Advanced Options > Startup Settings > Restart, then press 4 for Safe Mode.
Step-by-step solutions for Windows boot failures including black screen, infinite loading, automatic repair loop, safe mode access, and boot configuration fixes.
A boot failure can come from power, display, firmware settings, the boot configuration or the Windows installation itself. Start with the simplest checks and move inward. Most "no boot device" and automatic-repair loops are fixed by correcting the boot order, removing a faulty USB device or rebuilding the boot records.
Run these in an elevated Command Prompt or PowerShell unless stated otherwise.
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
bcdedit
chkdsk C: /f
Escalate if the drive is absent from BIOS/UEFI, if it makes clicking or grinding noises, or if the recovery environment cannot see the installation.
A boot failure can come from power, display, firmware settings, the boot configuration or the Windows installation itself. Start with the simplest checks and move inward. Most "no boot device" and automatic-repair loops are fixed by correcting the boot order, removing a faulty USB device or rebuilding the boot records.
The checks run in this order: Check power, display and peripherals, Check the boot order in BIOS/UEFI, Try Safe Mode, Run Startup Repair, Rebuild the boot records from the recovery prompt, Use System Restore or a repair upgrade. Work through them in sequence instead of jumping to the last step, because each check rules out a layer of the problem and makes the next result easier to interpret.
Before you make changes, back up important data and create a system restore point. Run the commands in an elevated Command Prompt or PowerShell, read the output of each one, and stop if a result looks worse than the original symptom.
Start at step 1 of the guide and work down. The first check either confirms the cause or rules it out, so you do not skip straight to a destructive repair.
Start at step 1 of the guide and work down. The first check either confirms the cause or rules it out, so you do not skip straight to a destructive repair.
Start at step 1 of the guide and work down. The first check either confirms the cause or rules it out, so you do not skip straight to a destructive repair.
Interrupt boot process 3 times to trigger Automatic Repair. Go to Troubleshoot > Advanced Options > Startup Settings > Restart, then press 4 for Safe Mode.
Bootrec.exe fixes boot configuration data (BCD) and Master Boot Record (MBR). Run bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, and bootrec /rebuildbcd from the command prompt in recovery environment.
Most repair steps need an elevated prompt. Open Command Prompt or PowerShell with Run as administrator before running commands such as sfc, DISM, chkdsk, netsh or net stop. Read-only checks can often run without elevation.
Escalate if the drive is absent from BIOS/UEFI, if it makes clicking or grinding noises, or if the recovery environment cannot see the installation.
No reviews yet. Be the first to review!