Why is there no sound after Windows update?
Updates can replace audio drivers. Roll back the driver in Device Manager (Sound > Driver > Roll Back Driver) or reinstall the latest driver from your manufacturer.
Fix no sound, audio device not detected, microphone not working, and other Windows sound issues. Update audio drivers and configure playback devices.
Audio problems are usually a wrong output device, a muted app, a stopped audio service or a driver issue. Check the device and volume first, then the service, then the driver. Bluetooth and HDMI add their own routing quirks.
Run these in an elevated Command Prompt or PowerShell unless stated otherwise.
services.msc
net stop Audiosrv
net start Audiosrv
devmgmt.msc
Escalate if no audio device appears in Device Manager, if the jack or speaker is physically damaged, or if the problem affects every operating system on the machine.
Audio problems are usually a wrong output device, a muted app, a stopped audio service or a driver issue. Check the device and volume first, then the service, then the driver. Bluetooth and HDMI add their own routing quirks.
The checks run in this order: Confirm the output device and volume, Run the audio troubleshooter, Check Device Manager, Restart the audio services, Reinstall or roll back the audio driver, Disable audio enhancements as a test. Work through them in sequence instead of jumping to the last step, because each check rules out a layer of the problem and makes the next result easier to interpret.
Before you make changes, back up important data and create a system restore point. Run the commands in an elevated Command Prompt or PowerShell, read the output of each one, and stop if a result looks worse than the original symptom.
Start at step 1 of the guide and work down. The first check either confirms the cause or rules it out, so you do not skip straight to a destructive repair.
Start at step 1 of the guide and work down. The first check either confirms the cause or rules it out, so you do not skip straight to a destructive repair.
Start at step 1 of the guide and work down. The first check either confirms the cause or rules it out, so you do not skip straight to a destructive repair.
Updates can replace audio drivers. Roll back the driver in Device Manager (Sound > Driver > Roll Back Driver) or reinstall the latest driver from your manufacturer.
Right-click the speaker icon in taskbar > Sounds > Playback tab. Right-click each device and select Test. Devices with green checkmarks are active. Enable disabled devices.
Most repair steps need an elevated prompt. Open Command Prompt or PowerShell with Run as administrator before running commands such as sfc, DISM, chkdsk, netsh or net stop. Read-only checks can often run without elevation.
Escalate if no audio device appears in Device Manager, if the jack or speaker is physically damaged, or if the problem affects every operating system on the machine.
No reviews yet. Be the first to review!