How To Use BSOD Crash Analyzer – Paste a Stop Code or Dump
- Copy the stop code and the four parameters from the blue screen, or the BugCheck event in Event Viewer.
- If you have a dump, run !analyze -v in WinDbg and copy the output, including the MODULE_NAME and IMAGE_NAME lines.
- Paste the text into the box and describe what the PC was doing when it crashed.
- Select your Windows version so the driver and update advice matches your build.
- Read the root-cause section first, then run the confirmation checks it lists before changing hardware.
What is BSOD Crash Analyzer – Analyze a Minidump or Stop Code?
A stop code tells you which check failed, but the crash dump tells you which driver was running when it failed. This analyzer takes the text you already have, the blue screen message, a stop code with its parameters, or the output of !analyze -v from WinDbg, and explains what the evidence points to.
Paste as much context as you can: the stop code, the four parameters, the module or driver named on the screen, and what the PC was doing at the time. The analysis separates the module that happened to be executing from the component that actually caused the fault, which is the distinction that stops people replacing the wrong part.
Use the result as a diagnostic plan, not a guarantee. It names the most likely driver, memory or hardware cause and the checks that confirm or rule it out, so you can move from a crash to a fix without guessing.
Benefits of Using BSOD Crash Analyzer – Paste a Stop Code or Dump
- Accepts pasted blue screen text, stop codes with parameters, or WinDbg !analyze -v output.
- Separates the module that crashed from the component most likely to have caused it.
- Produces a prioritized list of driver, memory and hardware checks.
- Explains the stop code in plain language alongside the dump evidence.
- Free daily queries with no software to install.
Best Practices
- Paste the full !analyze -v output rather than only the stop code; the module and stack lines carry most of the signal.
- Include the four bug check parameters, because they often point at the faulting address or object.
- Note whether crashes happen at idle, under load, during sleep or at boot; each pattern points to a different cause.
- Confirm the suggested cause with a memory test or driver rollback before replacing hardware.
- Remove serial numbers, product keys and personal data before pasting crash text.
Practical Examples
Paste a stop code with parameters
0x000000D1 (0x0000000000000008, 0x0000000000000002, 0x0000000000000000, 0xFFFFF88001234567) - the analyzer explains what the parameters imply and which driver class to check.
Paste !analyze -v output
The MODULE_NAME, IMAGE_NAME and FAILURE_BUCKET_ID lines identify the faulting module, and the analysis explains whether it is likely the cause or a victim.
Paste a named driver from the blue screen
A file such as nvlddmkm.sys or NETIO.SYS on the screen points to a graphics or network driver, and the analysis lists the rollback and update steps.
Paste repeated crashes with different codes
Changing stop codes with no common driver usually point to memory or power delivery, and the analysis prioritises the hardware checks.
Who Should Use This Tool
- Users who have a minidump but cannot read the WinDbg output.
- Technicians who want a second opinion on a crash bucket.
- Gamers and creators diagnosing crashes under GPU load.
- IT staff documenting the likely cause before opening a support case.
FAQs
What should I paste into the analyzer?
The stop code with its parameters, any driver or file name shown on the blue screen, and the !analyze -v output if you have a dump. A short note about what you were doing at the time helps separate load-related faults from idle or sleep faults.
Can it analyze a minidump file directly?
It analyzes the text output from a dump, not the .dmp file itself. Open the dump in WinDbg, run !analyze -v, and paste the result. The default minidumps are stored in C:\Windows\Minidump.
How accurate is an AI crash analysis?
It is a structured second opinion. It can identify the most likely driver or hardware cause from the code and module names, but it cannot read your hardware. Treat its output as a prioritized checklist and confirm each step.
What if the analyzer blames a driver I do not recognise?
Search the module name to find which device or program installed it. A module name often does not match the product name, so check the file path and publisher in Device Manager or the driver store.
Is my crash data stored?
Only the text you submit is sent to the AI provider to generate the analysis. Do not paste serial numbers, product keys or personal data.